Professional clearing saw for cutting large areas of grass and clearing scrub. Features M-Ironic engine management for optimum performance and efficiency. The low-emission, fuel-efficient STIHL 2-MIX engine will power a variety of mowing heads and metal blades for different applications. Ideal for contractors, landscapers and demanding property owners with large areas to maintain.


Standard features

  • Large fuel tank

    The transparent fuel tank with a volume of 0.75 l ensures long working intervals with fewer fuel stops. The level is easily visible from the outside. Easy to refuel through a large, easily accessible tank opening. (similar to illustration)

  • Air filter with long service life

    The easily accessible paper filter with a long service life means it can go for long intervals without changing. (similar to illustration)

  • Winter setting slide control

    It is quick and easy to switch the setting from winter to summer using the slide control. Using the winter setting will prevent the air filter and carburettor from freezing. (similar to illustration)

  • Manual fuel pump (Purger)

    A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.

  • STIHL M-Tronic

    This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.

  • STIHL ErgoStart (E)

    STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.

  • Simplified starting system

    Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.

  • Bike handle

    When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.

  • STIHL 4-point anti-vibration system

    In STIHL brushcutters, steel springs act as anti-vibration elements to reduce the transmission of vibrations caused by the motor and rotary cutter. The handles therefore have extremely low vibration and the devices is easy to guide. (similar to illustration)

  • Locking plug-in bolt

    Changing the tool is made particularly easy by locking the plug-in bolt in place. (similar to illustration)

  • Multi-function control handle

    Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.

  • Compensator

    This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.

  • Tool free handle adjustment

    The central wing nut enables easy adjustment without the use of tools. For transportation and space-saving storage, the handle can be rotated by 90°.




    Trimmer and Brushcutter Safety Manual (GB)


    Technical data

    Capacity cm3 37.7
    Performance kW 1.7
    Performance PS 2.3
    Weight kg 1) 8.5
    Sound pressure level with mowing head dB(A) 2) 99
    Sound power level dB(A) 2) 112
    Vibration value, left with mowing head m/s2 3) 2.5
    Vibration value, right with mowing head m/s2 3) 2.2
    Total length cm 4) 179
    Tank volume l 0.75
    Standard cutting tool AutoCut 40-2

Stihl Petrol Strimmer Brush Cutter

Price Plus Vat per
    • Facebook - Black Circle
    • Twitter - Black Circle

    © by FNR Plant Hire Ltd

    FNR Plant Hire Ltd, Registered in England No. 3957588 Registered office as above.

    VAT Reg. No. 190 4587 45 UTR:15413 05436 E&OE


    Block Grab
    8T Excavator
    FNR 13T Excavator
    8T excavators loaded on lorry
    9T Dumper
    FNR 1.7T Excavator & Auger
    FNR 1.7T Excavator
    hinowa hs 450
    FNR Laughton Show 2016
    3t dumper
    FNR Kubota K008
    bomag 120
    13T Excavator & 9T Dumper